DPA D:VOTE 4099B MICROFONO PER CONTRABBASSO 4099-B Nuovo
Consegna o spedizione immediata
Spedizione inclusa
Specifications for d:vote™ 4099B Clip Microphone for Bass
Directional characteristics: | Supercardioid |
---|---|
Principle of operation: | Pressure gradient |
Cartridge type: | Pre-polarized condenser |
Frequency range: | 20 Hz to 20 kHz |
Frequency range, ± 2 dB, 20 cm (7.9 in) distance: | 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz |
Sensitivity, nominal, ±3 dB: | 6 mV/Pa; -44.5 dB re. 1 V/Pa |
Equivalent noise level, A-weighted: | Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A)) |
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): | 71 dB |
Total harmonic distortion (THD): | < 1 % up to 123 dB SPL peak; < 1 % up to 120 dB SPL RMS sine |
Dynamic range: | 100 dB |
Max. SPL, peak before clipping: | 142 dB |
Output impedance: | From MicroDot: 30 to 40 ohm, from DAD6001: 100 ohm |
Cable drive capability: | 300 m (984 ft) with DAD6001 |
Output balance principle: | Signal balanced with DAD6001 XLR adapter |
Common Mode Rejection Ratio (CMRR): | > 60 dB at 50 Hz to 15 kHz with DAD6001 XLR adapter |
Power supply: | Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power ±4 V with DAD6001 XLR adapter |
Current consumption: | 1.5 mA; 3.5 mA with DAD6001 XLR adapter |
Connector: | MicroDot |
Color: | Black |
Weight: | 33 g (1.16 oz) |
Microphone length: | 45 mm (1.8 in) |
Cable length: | 1.8 m (6 ft) |
Polarity: | Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter) |
Operating temperature range: | -40 °C to 45 °C (-40 °F to 113 °F) |
Relative humidity: | Up to 90 % |
Gooseneck, length: | 140 mm (5.5 in) |
Puoi contattarci in molti modi e risponderemo sempre molto velocemente. Il nostro servizio clienti è a tua disposizione tutti i giorni negli orari di apertura del negozio.